MSP-TS430PZ100USB
B.36 MSP-TS430PZ100USB
Due to the use of diodes in the power chain, the voltage on the MSP430F5xx device is approximately
0.3 V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for
example, to run the MCU at 3.0 V, set it to 3.3 V.
Figure B-72. MSP-TS430PZ100USB Target Socket Module, Schematic
142
Hardware
Copyright © 2009–2016, Texas Instruments Incorporated
SLAU278Y – May 2009 – Revised March 2016
Submit Documentation Feedback
www.ti.com