Table of Contents
Advertisement
MSP Debug Probe Overview
2
MSP Debug Probe Overview
Table 1
is an overview of the capabilities and features for the available MSP debug probes.
Never disconnect the JTAG or emulator USB cable during an active debug
session. Always terminate a running debug session properly, by clicking on the
"Terminate" icon, before disconnecting the target device.
Feature and MSP430 Device Support
Supports all programmable MSP430 and
CC430 devices
Supports only F20xx, G2x01, G2x11,
G2x21, G2x31
Supports F20xx, F21x2, F22xx, G2x01,
G2x11, G2x21, G2x31, G2x53
Supports F20xx, F21x2, F22xx, G2x01,
G2x11, G2x21, G2x31
Supports F5438, F5438A
Supports BT5190, F5438A
Supports only F552x
Supports FR57xx, F5638, F6638
Supports only CC430F613x
Supports MSP432Pxx
Allows JTAG access protection
(4)
(Fuse Blow)
Adjustable target supply voltage
Fixed 2.8-V target supply voltage
Fixed 3.3-V target supply voltage
Fixed 3.6-V target supply voltage
4-wire JTAG
(5)
2-wire JTAG
BSL tool or mode
Backchannel UART
Supported by CCS for Windows
Supported by CCS for Linux
Supported by CCS for OS X
(1)
The MSP-FET430PIF is for legacy device support only. This emulation tool does not support any devices released after 2011.
(2)
See
Section 3.1
to identify the hardware.
(3)
The eZ-FET Emulation IP and eZ-FET Lite Emulation IP are used as the onboard emulation for the MSP LaunchPad tools.
(4)
See
Section 5.5
for more information.
(5)
The 2-wire JTAG debug interface is also referred to as Spy-Bi-Wire (SBW) interface.
4
MSP Debuggers
Table 1. Debug Probes Features and Device Compatibility
✓
✓
✓
✓
✓
✓
✓
✓
✓
Copyright © 2015–2016, Texas Instruments Incorporated
CAUTION
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
SLAU647F – July 2015 – Revised December 2016
www.ti.com
(1) (2) (3)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Submit Documentation Feedback
Advertisement
Table of Contents
