Removing A Hot Swappable Hard Drive From A Hard Drive Carrier - Dell PowerEdge R930 Owner's Manual

Removing a hot swappable hard drive from a hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE: Hot swappable hard drives are supplied in hot swappable hard drive carriers that fit in the hard drive slots.
1 Keep the Phillips #2 screwdriver ready.
2 Remove the hard drive carrier from the system.
Steps
1 Remove the screws from the side rails on the hard drive carrier.
2 Lift the hard drive out of the hard drive carrier.
Figure 40. Removing a hot swappable hard drive from a hard drive carrier
1 screw (4)
3 hard drive carrier
Next steps
1 Install the hot swappable hard drive into the hard drive carrier.
2 Install the hot swappable hard drive carrier into the system.
Related links
Safety instructions
Removing a hot swappable hard drive carrier
Installing a hot swappable hard drive into a hard drive carrier
Installing a hot swappable hard drive carrier
Installing a hot swappable hard drive into a hard drive carrier
Prerequisite
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Keep the Phillips #2 screwdriver ready.
2 hard drive
Installing and removing system components 97