Removing A Memory Riser - Dell PowerEdge R930 Owner's Manual

Steps
1 Align the memory riser blank with the guides on the memory riser and fan cage.
2 Insert the memory riser blank into the guides on the memory riser and fan cage until it is firmly seated.
Figure 19. Installing the memory riser blank
1 memory riser blank
3 connector protective cap
Next step
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system

Removing a memory riser

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
72 Installing and removing system components
2 guide on the memory riser and fan cage (2)