1. Press the power button to turn off the order taker unit.
2. While holding down the buttons T and P simultaneously,
press the power button to turn on the order taker unit.
The order taker unit enters the setup mode where the
indicators and buttons have different functions than in
normal operation.
3. Select a default channel setup from four options, press-
ing the button T.
4. Press the button A/B to move to the talk setup and page
setup.
5. Press the button T to select a talk mode.
6. Press the button P to select a page mode.
7. Press the button A/B to confirm that the indicators show
the three modes selected for the default channel, talk
and page.
8. Press the power button to turn off the order taker unit,
and then turn it on again. The newly selected operation
mode will be applied to the order taker unit.
Power button
Power on.
Keep holding down.
A
B
A
B
Power button
9