Common Issues - Uniden TRU9380 User Manual

Common Issues

your problem, please call our Customer Hotline (see back cover page).
Symptom
The charge LED won't illuminate
when the handset is placed in the
cradle.
The audio sounds weak.
Can't make or receive calls.
Severe noise interference.
The Caller ID does not display.
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have
more than one handset) and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset are clean.
• Move the handset and/or base away from metal objects or appliances and try
again.
• Make sure that you are not too far from the base.
• Make sure that you are not too far from the base.
• Make sure the line is not in use. If an outside call is already using a line, you
cannot use that line to make another outside call.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and reconnect.
• Change the Digital Security Code (see Changing the Digital Security Code on
page 51).
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
• Move to another location or turn off the source of interference.
• The call was placed through a switchboard.
• Call your telephone provider to verify your Caller ID service is current. There
may be a problem with your Caller ID service.
52