Seven-Digit Dialing - Uniden TRU9380 User Manual

Cordless phone system with digital answering system and call waiting/caller id

Hide thumbs Also See for TRU9380:

Table of Contents

Seven-Digit Dialing

If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your

phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your

area code will show all 10 digits. To enter an area code, follow the steps below:

Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.

Use the number keypad ([0] through [9]) to enter a 3-digit area code. If an area code has already been stored, it

appears in the display. Press [menu/clear] to delete the stored code, and then enter a new one.

Press [select/

]

Using the Intercom

You can use the intercom to talk to another station without using the phone line.

Making an Intercom Page

With the phone in standby, press [hold/int'com/xfer].

From the

Use [

] or [

handset

page all other stations.

To cancel the intercom page, press [ ].

Note: Intercom paging will be canceled if any of the following things occur:

— You receive an outside call or an intercom page while selecting the other handset.

— You do not select a handset within 30 seconds.

— The party does not answer the page within one minute.

— The party is busy.

— The party is out of range (UNAVAILABLE appears in the display).

] to select the station you want to talk with, then press [select/

]. Select ALL to

Table of Contents