Using Caller Id And Call Waiting - Uniden TRU9380 User Manual

Using Caller ID and Call Waiting

If you subscribe to Caller ID from your phone company, your phone will show you the caller's phone number and
name (if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also
shows you the name and the number of any call that comes in while you're on the line.
If your telephone provider supports seven-digit dialing, you can save your local area code so it does
not display in the Caller ID list. See Seven-Digit Dialing on page 35 for more information.
Using the Caller ID List
You can store up to 30 Caller ID numbers in each handset. Once you reach your maximum Caller ID entries of 100,
Caller ID information will not be stored (but it will still display when the call comes in).
To open the Caller ID list, press [
Caller ID records and the total number of stored records. Use [
Making a Call from a Caller ID Record
1. When the phone is in standby, press [
2. Use [ ] and [ ]
3. To add (or delete) a "1" to the beginning of the displayed phone number, press [
4. Press [ or [ ] to dial the number.
Note: You can also press [
number you want to dial, press [select/
] (on the right side of the four-way key). The phone will show the number of new
] to open the Caller ID list.
or [ ] before you open the caller ID list. When you come to the phone
].
28
] and [ ] to scroll through the list, or enter a
*
/tone].