Cisco MDS 9132T Installation Manual page 39

Installing the Cisco MDS 9132T Switch
c) Repeat Step 1b, for the other front rack-mount bracket on the other side of the switch and be sure to position that
bracket the same distance from the front of the switch.
Step 2
Install the switch onto the 2-post rack
a) Holding the switch with both hands, position the back of the switch between the two posts of the rack. Then gently
move the switch until the front rack-mount brackets come in contact with two rack posts.
Cisco MDS 9132T Fibre Channel Switch Hardware Installation Guide
Installing the Switch in a 2-Post Rack
33