Alesis STRIKE User Manual page 17

These are the parameters on the FX/MIDI page of Voice Mode (they affect both layers):
Parameter Description
FX
EQ/Comp This determines if equalization and compression will
be applied to the selected voice.
Reverb Send This is the voice's send level for the reverb effect. It
determines how much reverb you want to apply to the
selected voice.
These are the voice's send levels for the FX1 and FX2
FX1 Send,
effects. It determines how much of each FX processor
FX2 Send
you want to apply to the selected voice.
MIDI
MIDI Chan This is the MIDI channel the trigger will use when
sending MIDI notes over the USB port and MIDI out.
This is the MIDI note the trigger will send over its USB
MIDI Note
port and MIDI out when struck.
Gate Time This is the duration of the MIDI note the trigger will
send over its USB port and MIDI out when struck.
Note Off This determines how the trigger will send a MIDI Note
Off message.
Other
Priority This determines the voice's priority in the Strike
module's overall polyphony. If the maximum number
of polyphony voices are playing, triggering an
additional one will cause low-priority voices to stop so
that higher-priority voices can sound.
MuteGroup This determines the voice's mute group. When two or
more voices are assigned to a mute group, triggering
one of the voices will immediately mute all other
voices in that mute group.
Playback This determines whether the voice on this trigger will be
allowed to sound only once at any given time or multiple
times (limited only by the module's polyphony limit).
Values/Settings
Off, On
00–99
00–99
01–16
000 (C-2) – 127 (G8)
Off, 00–99 ms, 1/32, 1/16,
1/8, 1/4, 1/2. Trplt indicates a
triplet-based time division.
Not Sent: The trigger will not
send MIDI Note Off messages.
Sent: The trigger will send a
MIDI Note Off message after
the Gate Time.
Alternate: Striking a trigger
will cause it to alternate
between sending MIDI Note
On and Note Off messages.
Low
Medium
High
Off
01–09
Mono
Poly
17