Editing Voices - Alesis STRIKE User Manual

Editing Voices

Voice Mode shows the kit's voice settings, which determine how each instrument sounds when you strike
each trigger. (When creating user kits, this is where you'll spend most of your time.)
To edit voice settings:
1. After selecting a kit, press Edit > Voice to enter Voice
Mode.
2. Select a trigger by doing one of the following:
•
If the Note Chase button is off, press it so it
turns on. Strike the desired zone of the
trigger whose voice you want to edit.
•
Use the cursors to select the Trig field in the
upper-right corner. Turn the data dial to
select the desired zone of a trigger.
3. You'll see the Layers page first. Press the function
button under the settings you want to edit: level
settings (F1/Level), tone and tuning settings (F2/Tone),
or velocity settings and dynamics (F3/Velocity). You'll
also see F4/Inst, which lets you edit the instruments of
your kit (see Assigning
To view the FX/MIDI page instead, press F5/FX/MIDI,
and press the function button under other voice
settings you want to edit: effect settings (F1/FX), MIDI
settings (F2/MIDI), or other performance-related
settings (F3/Other). Press F5/Layers to return to the
Layers page.
4. Use the cursors to select the parameter you want to
edit.
Turn the data dial to change the parameter value or
setting.
To adjust other voice settings, repeat Steps 2–4.
To return to the previous screen, press F6/Back.
Instruments).
15