Installing The Wireless Module In Model 2710P - HP UNDP-1H Installation Manual

Installing the wireless module in model 2710p

In the HP Compaq 2710p Notebook PC, the slot for the wireless module
is located in the hard drive bay on the bottom of the computer.
Follow the procedure below to install an HP Broadband Wireless Module
in the hard drive bay:
Follow the procedures in "Preparing the computer," in Chapter 1,
1.
"Getting started."
Turn the computer upside down.
2.
Use the Phillips screwdriver provided in this kit to loosen the 6 hard
3.
drive cover screws (1).
Lift the hard drive bay cover (2) away from the computer.
4.
18 Chapter 2 Installing the HP Broadband Wireless Module