Using Hp Broadband Wireless - HP UNDP-1H Installation Manual

Using HP Broadband Wireless

To use the mobile broadband capability of your HP Broadband Wireless
computer, you must do the following:
Purchase mobile network operator service for your HP Broadband
1.
Wireless computer.
The coverage area of each mobile network operator is different. For
information on coverage and how to establish service, see the HP
Web site:
http://www.hp.com/broadbandwireless
Locate the slot for the HP Broadband Wireless Module. Refer to the
2.
following table to determine the locations for your computer.
Computer model
nc6400
6910p
2510p
2710p
*wireless wide area network (WWAN)
Install the HP Broadband Wireless Module in your HP Broadband
3.
Wireless computer.
Instructions for installing the HP Broadband Wireless Module are
provided in Chapter 2, "Installing the HP Broadband Wireless
Module."
Install the HP Broadband Wireless Module software on your
4.
computer.
The software is included on the HP Broadband Wireless Software
disc in the HP Broadband Wireless Module kit. Instructions are
provided in Chapter 5, "Installing the HP Broadband Wireless
Module software."
2 Chapter 1 Getting started
Wireless module slot
Under the keyboard
Under the keyboard
WWAN* module compartment
Hard drive bay