Installing The Texture Module; Removing The Visualize Fx4 Interface Board - HP Kayak XW U3-W3 User Manual

riotx.bk : riotx-us.fb4 Page 6 Tuesday, December 16, 1997 3:08 PM
CAUTION
1 HP VISUALIZE fx4 Texture Module User's Guide

Installing the Texture Module

Installing the Texture Module
Be very careful when handling the VISUALIZE fx4 board. Bumping,
bending or dropping the board can cause irreparable damage.
To install the texture module, carefully follow the steps described in
the next three sections.

Removing the VISUALIZE fx4 Interface Board

1 Switch off the display and computer, disconnect all power cables and
any telecommunication cables.
2 Remover the computer's cover (refer to the computer's User's
Guide for detailed instructions).
3 Carefully place the computer on its side.
6 English English