Installing The Wireless Module In Model 2510P - HP UNDP-1H Installation Manual

Broadband wireless module
Table of Contents

Advertisement

Installing the wireless module in model 2510p

In the HP Compaq 2510p Notebook PC, the slot for the wireless module
is located in the WWAN module compartment on the bottom of the
computer.
Follow the procedure below to install an HP Broadband Wireless Module
in the WWAN module compartment:
Follow the procedures in "Preparing the computer," in Chapter 1,
1.
"Getting started."
Turn the computer upside down.
2.
Use the Phillips screwdriver provided in this kit to loosen the WWAN
3.
module compartment cover screw (1).
Lift the WWAN module compartment cover away from the
4.
computer (2).
If your computer has a wireless module currently installed,
NOTE:
you must remove it before installing the new module. Refer to
Chapter 4, "Removing an HP Broadband Wireless Module." After
you remove the existing module, begin the following procedure at
step 7 to install the new module.
Installing the wireless module in model 2510p
15

Advertisement

Table of Contents
loading

Table of Contents