Treadmill: Selecting Safety Code Protection; Choosing A Language - Precor EFX534i Product Owners Manual

Treadmill: Selecting Safety Code
Protection
When the equipment is shipped from the factory, the safety code
protection feature is disabled. If you enable the safety code, your
patrons will need to enter four number keys in sequence to begin
their exercise session and, on the treadmill, start the running belt. If
the correct keys are not pressed within two minutes, further access
is denied. For more information, refer to Entering the Safety Code.
S A F E T Y C O D E
1. At the
arrow keys to alternate between the two selections.
Setting Description
E N A B L E D
Causes the safety code prompt to appear prior to
a workout and when returning from pause mode.
D I S A B L E D Does not require a safety code to operate.
CAUTION: Do not assume the equipment is safe because of
safety code protection. Never leave children unsupervised
around the equipment.
2. When you are ready, press OK to accept the displayed setting
and move to the next feature. For further options, refer to the
table in Accessing Club Programming Mode and Changing the
Settings.
Product Owner's Manual: Club Features
prompt, press OK. Use the navigational

Choosing a Language

The equipment can display user prompts, text, and user entries in
several different languages. When the equipment is shipped from
the factory, it is set to display English.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
S E L E C T L A N G U A G E
1. At the
navigational arrow keys to choose a language.
2. When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in Accessing Club Programming Mode and Changing the
Settings.
prompt, press OK. Use the
19