Table of Contents
Advertisement
38
en | Appendices
2017.09 | 0.12 | F.01U.xxx.xxx
1 Indoor main building
3 Connect the ground of the camera
power supply to the building earth
ground.
5 Connect the ground of the camera to
the ground of the surge protector.
7 Equipment enclosure
9 Connect the Bus Bar to the Equipment
Grounding Electrode.
11 Equipment Grounding Electrode
13 Down Conductor; refer to NFPA 780,
Class 1 and 2.
15 Lightning Rod Grounding Electrode
2 Network equipment
4 Surge protection
6 Install Cat5e/Cat6e Ethernet (Shielded
8 Outdoor rated High PoE-compatible
10 Outdoor High PoE-compatible surge
12 Lightning Rod
14 Install outdoor High PoE-compatible
Installation Manual
MIC IP starlight 7000i
Twisted Pair (STP)) cable. Route cable
through grounded metal conduit.
midspan
protection to protect indoor
equipment
surge protection as close as possible
to the camera. Connect to the
Equipment Grounding Electrode.
Bosch Security Systems
Hide quick links:
Advertisement
Table of Contents
