Table of Contents
Advertisement
Commissioning
Positioning of the charger
Positioning of the charger
Place the charger on a solid, even surface, for example, on a table. Choose a loca-
tion that is protected from direct sunlight and dampness.
• Plug the small plug of the connecting cord into the back of the charger.
• Plug the plug-in power supply into a socket.
The charger is ready for operation.
Note
• You may only use the charger with the standard 6.2 V 620 mA plug-in power sup-
ply, reference number 4.999.109.002.
• The plug-in power supply must be accessible and close to the charger. In case of
danger it has to be unplugged from the socket.
• You are therefore advised to use an antiskid surface for your charger, in particular
with new furniture or furniture that has been refreshed using varnish preservation
agents. Varnishes or varnish preservation agents may contain substances that sof-
ten the feet of the device, thus leaving unsightly stains on the surface of your furni-
ture. Avaya cannot assume liability for damage of this kind.
10
i
Advertisement
Table of Contents
