Rearview Mirrors - Honda ST1300 2007 Owner's Manual

Refer to Saf ety Precautions
Both rearview mirror assemblies use a special breakaway mount which allows a
controlled separation of the mirror assembly from its base upon impact with an
obstacle. A short cable keeps the mirror assembly connected to the mirror
bracket.
LEFT SIDE
mirror cover
Inspection
Check the mirror for correct angle.
Press on the mirror cover firmly until it clicks into position on the mirror
mount.
After reinstalling, check the mirror for correct angle and the front turn signals
for proper operation.
For your safety, be sure to immediately reinstall any separated mirror assembly.
Otherwise, the mirror and turn signal will not be available to you while riding.
If a mirror assembly is damaged so badly that it cannot be reused or reinstalled
on its base, remove it from the base and transport the motorcycle to Honda
dealer for repair.
Riding with a mirror assembly hanging by its retaining cable may damage the
motorcycle's plastic body.
on page 72 .

Rearview Mirrors

Servicing Your Honda
mirror
91