Using Cycle Programs - Brother KE-430HX Instruction Manual

6-6. Using cycle programs

Sewing patterns that have been registered in user programs can be registered in up to 30 cycle programs (C001 to C030).
One cycle program can contain user programs up to a maximum of 50 steps.
When sewing the sewing patterns in a certain order, it can be useful to register them in a cycle program beforehand.
<Recording method>
1
Switch to the cycle program setting screen.
2
Select a cycle program number.
3
Select the program number to be registered in step 1.
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Touch the menu key to switch to the setting menu screen,
and touch "Cycle program setting" in the menu.
・ The display will switch to the select cycle program
Touch the
cycle program number.
(1)
・ If no cycle program has been registered, "---" will be
Select the program number for the program you would
like to edit, and touch the list.
・The cycle program edit screen will be displayed.
(2)
Select the step No.01 on the top of the list.
・ A check mark will appear in the check column of the list
(3)
・ If you would like to delete the registration, you can do it
KE-430HX/KE-430HS, BE-438HX/BE-438HS
screen.
key (1) or the
displayed after the program number.
which was touched.
by touching a step to select it, and then touching the
clear key (3).
key (2) to select the
67