Table of Contents
Advertisement
10. TABLE OF ERROR CODES
Version updating-related errors
Code
No panel control program is present.
E870
Write the panel control program.
E880
Version updating requests could not be received when power was turned on.
Communication error occurred during version updating.
E881
Turn off the power, and then check.
No USB memory is inserted.
E882
Turn off the power, and then check.
No control program is present in the USB memory.
E883
Turn off the power, and then check.
There is a problem with the control program.
E884
Write the correct file into the USB memory.
Communication error within the USB memory occurred during main version updating.
E885
Turn off the power, and then check the connection of the USB memory.
Fault is found in the version up file during main version updating.
E886
Turn off the power, and then repeat the version update procedure.
Failed to save the version up file during main version updating.
E887
Turn off the power, and then repeat the version update procedure.
Others errors
Code
There is an error with an optional part.
E990
Turn off the power, and then check if there are any problems with the optional parts.
If an error code that is not listed above appears or if carrying out the specified remedy does not solve the
problem, contact the place of purchase.
94
Cause and remedy
Cause and remedy
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Hide quick links:
Advertisement
Table of Contents
