Brother KE-430HX Instruction Manual page 63

430HX/HS:
Intermediate work clamp height (L):
Maximum work clamp height (H):
438HX/HS:
Work
Intermediate work clamp height (L):
clamp
height
Maximum work clamp height (H):
* It is possible to change the value of
intermediate work clamp height (L) only when
memory switch No. 071 is set to "2" or
memory switch No.072 is set to "2" or "5".
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
1(mm) to 17(mm)
(Initial value is 1.)
10(mm) to 17(mm)
(Initial value is 14.)
1(mm) to 13(mm)
(Initial value is 1.)
6(mm) to 13(mm)
(Initial value is 10.)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Initial value
53