Using Cycle Programs - Brother KE-430FX Instruction Manual

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-5. Using cycle programs

Sewing patterns that have been recorded in user programs can be recorded in up to 30 cycle programs (C01 to C30).
One cycle program can contain up to a maximum of 50 steps (St1 to St50).
When sewing the sewing patterns in a certain order, it can be useful to record them in a cycle program beforehand.
<Recording method>
Switch to cycle program recording mode.
1
2435B
Select a cycle program number.
2
2437B
Select the program number to be recorded in step 1.
3
Apply the program setting.
4
49
While pressing the TEST key, press the
・ The cycle program number (C01 to C30) will be
・ If no program has been recorded for a step, '---' will
TEST indicator flashes
Press the
number that you would like to use.
TEST indicator flashes
Press the
number to be recorded in the TENSION display (3).
・ If the value is changed, the display will change to
・ To cancel the recording, keep the RESET key
TEST indicator flashes
Press the ENTER key.
・ The display will change from flashing to illuminated,
・ If you press the
KE-430FX/KE-430FS, BE-438FX
displayed in the PROGRAM No. display, the step
number (St1 to St50) will be displayed in the menu
display, and the program number will be displayed in
the TENSION display.
be displayed for that step.
or key to select the cycle program
'St 1' will be displayed.
•
or key (2) to display the program
flashing.
pressed for more than 2 seconds so that '---' is
displayed.
and this means that the setting has been applied.
/
the TEST key without pressing the ENTER key, you
can cancel the parameter changes.
key (1).
2436B 2382B
2438B 2382B 2383B
2414B
keys (4), the / keys (5) or