Brother KE-430HX Instruction Manual page 38

3. INSTALLATION
Operator
28
Green and yellow
wire (ground wire)
KE-430HX/KE-430HS, BE-438HX/BE-438HS
<200 V system>
(1) Power switch
(2) Wood screws [2 pcs]
4145M
(3) 3-pin power supply connector
3877B
(4) Power cord
(5) Staples [4 pcs]
1. Attach an appropriate plug to the
power cord (4). (The green and yellow
wire is the ground wire.)
2. Insert the
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the four
staples (5) to make sure that they do
not pierce the cords.
• Do not use extension cords, otherwise
machine operation
result.
power plug into a
problems may