Cisco ASR 1013 Quick Start Manual page 10

Figure 4 Four Cable-Management Brackets on the Cisco ASR 1013 Router
1 2
Cable-management brackets; two brackets for each side
1
Step 3 Using the top and bottom rack-mount ear hole, insert the screw through cable-management bracket and into the chassis
rack-mount bracket.
Using a Phillips screwdriver and the
Step 4
bracket.
Repeat Step 1through Step 4 for the other side of the Cisco ASR 1013 Router.
Step 5
This completes the procedure for installing the cable-management bracket on a Cisco ASR 1013 Router for a rack-mount
configuration.
10
Chassis front rack-mount bracket and ear holes
2
, thread and tighten the screw to the cable-management
cable-management screw
1 2 3