Access The Answering Machine Remotely - Binatone Eclipse Plus User Manual

11.7.1

Access the Answering Machine Remotely

1. Dial your phone number from any touch-tone phone.
2. When your answering machine answers your call and starts playing
your announcement, press the < # > key.
• The announcement will stop playing.
3. Enter your Remote Access Code (same as your security code) within 8
seconds using the numeric keypad on the touch-tone phone.
Note that the answering machine will drop the call if you do not
enter the SECURITY CODE within 8 seconds.
4. If the code is accepted, you will hear a confirmation tone.
5. The answering machine will start to playback all the messages on
your answering machine, beginning with new messages, or if there
are no recorded messages you will hear four beeps.
6. Use the keypad on the touch-tone phone to carry out the following
operations:
Keys
1
2
3
6
7
8
7. When you have finished listening to your messages, simply hang up
the phone to end.
Note:
If your answering machine is off and Remote Access is always activated
(See Activate/Deactivate Remote Access on page 69 ), the answering
machine will answer your call after 14 rings.
If you enter an incorrect Remote Access Code, you will hear a triple-beep
error tone, and you will need to enter the code again. If you enter the
wrong Remote Code twice consecutively, the call will end automatically.
Repeat the previous message.
Playback messages / Repeat the current message.
Skip to the next message.
Delete the current message.
Stop message playback.
Turn off the answering machine.
77