Answering Machine Buttons And Lights; Setting Up The Answering Machine; To Set The Clock; To Check The Clock - Binatone DP411 User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine buttons and
lights
DELETE button
Press to delete messages after
playing them back.
CLOCK button
Press to set or check
the date and time.
OGM/Rewind button
Press to record your
outgoing message.
Press to rewind during
message playback.
ANSWER/MESSAGE
light
Comes on when the
machine is switched on. PLAY/PAUSE button
Flashes when you have
Press to play back
new messages; the
messages and memos.
number of flashes
Press to pause during
between each long
message playback.
pause tells you how
On the underside of the base unit
RING button
Press to set the number of rings
before the machine answers a call.
CODE button
Press to set your remote security code.
18
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:50:04
MEMO/Fast Forward
button
Press to record a
To set the
memo.
clock
Press to fast-forward
during message
playback.
ANSWER ON/OFF :
STOP button
Press and hold to
switch the machine on
and off.
FULL
Press briefly to switch
between OGM1 and
OGM2.
Press to stop recording
or playback.
MEMORY FULL light
This flashes when the
machine's memory is
full. You'll need to
delete some messages
to make room for new
ones.
RING
CODE
To check the
clock
Binatone Help Line: 01325 304 473

Setting up the answering machine

Note — if you pause too long between the steps
listed below, the machine will time out and you will
need to start again.
1
Press and hold the CLOCK button until you
hear ' please set day'
u When you release the button, the machine
tells you the current day setting.
2 Press and release the FAST FORWARD or
REWIND button repeatedly until machine
says the correct day
3
Press and release the CLOCK button
u You hear 'please set time' and the machine
tells you the current hour and AM/PM setting.
4 Press and release the FAST FORWARD or
REWIND button until the machine says the
correct hour
5
Press and release the CLOCK button
u The machine tells you the current minutes
setting.
6 Press and release the FAST FORWARD or
REWIND button until the machine says the
correct minutes
7 Press and release the CLOCK button
u The machine tells you the day and time you
have set.
If you want to change the setting, just
repeat steps 1 to 7
To check the day and time any time:
◗
Briefly press the CLOCK button
19