Daewoo DP-42SM Service Manual page 46

Safety Precautions
(22) Do not cover or wrap the product with a cloth or other covering while power is supplied to the
product.
(23) Before turning on power to the product, check the wiring of the product and confirm that the
supply voltage is within the rated voltage range. If the wiring is wrong or if a voltage outside the
rated range is applied, the product may malfunction or be damaged.
(24) Do not store this product in a location where temperature and humidity are high. This may cause
the product to malfunction. Because this product uses a discharge phenomenon, it may take time
to light (operation may be delayed) when the product is used after it has been stored for a long
time. In this case, it is recommended to light all cells for about 2 hours (aging).
(25) This product is made from various materials such as glass, metal, and plastic. When discarding it,
be sure to contact a professional waste disposal operator.
(26) If faults occur due to arbitrary modification or disassembly, LG Electronics is not responsible for
function, quality or other items.
(27) Use of the product with a combination of parameters, conditions, or logic not specified in the
specifications of this product is not guaranteed. If intending to use the product in such a way, be
sure to consult LGE in advance.
(28) Within the warranty period, general faults that occur due to defects in components such as ICs
will be rectified by LGE without charge. However, IMAGE STICKING due to misapplying the
above (12) provision is not included in the warranty. Repairs due to the other faults may be
charged for depending on responsibility for the faults.
-45-