Parts Of Module; Safety Precautions - Daewoo DP-42SM Service Manual

II. Parts of MODULE

1. Safety Precautions

PDP Module is a display device to be divided into a Panel part and a Drive part. The Panel part consists
of Electrodes, Phosphor, various dielectrics and gas, and the Drive part includes electronic circuitry and
PCB.
When using/handling this PDP Module, pay attention to the below warning and cautions.
Warning
Indicates a hazard that may lead to death or injury, if the warning is ignored and the product is handled
incorrectly.
Caution
Indicates a hazard that can lead to injury or damage to property if the caution is ignored and the product
is handled incorrectly.
WARNING
(1) Do not supply a voltage higher than that specified to this product. This may damage the product
and may cause a fire.
(2) Do not use this product in locations where the humidity is extremely high, where it may be
splashed with water, or where flammable materials surround it. Do not install or use the product in
a location that does no satisfy the specified environmental conditions. This may damage the
product and may cause a fire.
(3) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off
the power. Continuing to use the product, it is may cause fire or electric shock.
(4) If the product emits smoke, and abnormal smell, or makes an abnormal sound, immediately turn
off the power. Continuing to use the product, it may cause fire or electric shock.
(5) Do not disconnect or connect the connector while power to the product is on. It takes some time
for the voltage to drop to a sufficiently low level after the power has been turned off. Confirm that
the voltage has dropped to a safe level before disconnecting or connecting the connector.
(6) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause electric
shock.
(7) Do not damage or modify the power cable. It may cause fire or electric shock.
(8) If the power cable is damaged, or if the connector is loose, do not use the product: otherwise, this
can lead to fire or electric shock.
(9) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it with a
dry cloth. Otherwise, this can lead to fire.
(10) PDP Module uses a high voltage (Max.450V dc). Keep the cautions concerning electric shock
and do not touch the Device circuitry when handling the PDP Unit. And because the capacitor of
the Device circuitry may remain charged at the moment of Power OFF, standing by for 1 minute
is required in order to touch the Device circuitry.
CAUTIONS
(1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface
such as an inclined surface. The product may fall off or fall over, causing injuries.
(2) Before disconnecting cable from the product, be sure to turn off the power. Be sure to hold the
connector when disconnecting cables. Pulling a cable with excessive force may cause the core of
the cable to be exposed or break the cable, and this can lead to fire or electric shock.
(3) This product should be moved by two or more persons. If one person attempts to carry this product
alone, he/she may be injured.
-43-