Page 3
DP-SP20 PLASMA MONITOR (DISPLAY) SPEAKER Thank you for purchasing the Daewoo Electronic Plasma Display Speakers. These speakers are specifically designed only for the Daewoo Plasma Display. To ensure the safe operation of the unit, please read these instructions before installing.
Page 4
TABLE OF CONTENTS 1. Check for enclosed parts ......2 2. Important Safety Instructions ...... 3 3. Assembly Instructions ......... 5 Using speakers when attached to the plasma display 2) Using speakers on its own stand...
Page 5
PLASMA DISPLAY SPEAKER SPEAKER 1. PLEASE CHECK THE FOLLOWING ITEMS SHOWN BELOW M5 SCREWS VIBRATION ABSORBENT SPONGE (16) SPEAKER WIRES SPECIAL SCREWS / ROUND HEAD SCREWS STAND FIXED BRACKETS...
Do not use the speakers with other products. Do not alter or modify any parts These speakers are specifically manufactured to be used with the Daewoo Plasma display to enhance your listening pleasure. (Failing to do so may cause the unit to fall and break)
Page 7
PLASMA DISPLAY SPEAKER PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INSTALLING OR HANDLING When assembling, be sure to use the enclosed Please be careful not to stain the speakers with parts and make sure all parts are tightly any gas or oil. screwed as instructed.
3. ASSEMBLING INSTRUCTIONS USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS Clean the surface with soft, lint-free cloth Attach the sponge to the side of the where sponges will be attached. speaker that will be attached to the plasma display.
Page 9
PLASMA DISPLAY SPEAKER INSTALLING SPEAKERS TO THE PLASMA DISPLAY Place a protective covering over the surface you will be working on and lay the plasma display as shown below. . Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto the fixed brackets to the squared holes in the back of the plasma display.
CONNECTING SPEAKER WIRES Take the speaker wire(2) and use the red cord to connect to and fro (+) inputs, and use the black cord to connect to and fro (-) inputs. Note Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds.
Page 11
PLASMA DISPLAY SPEAKER USING SPEAKERS ON ITS OWN STAND INSTALLING SPEAKERS TO ITS OWN STAND. Please be sure to have the vibration absorbent sponge onto the side of Use a coin to secure the speaker where the the special screws stand will be attached.