Troubleshooting - Zte ZXHN H268A User Manual

Note:
Even through the 2.4 GHz wireless mobile is not used, the signals generated
by the fixed phone also interfere with the wireless network.
3.3 Configure Your Internet
1. Open a browser on your computer or notebook PC that is connected to the
router, and then enter
2. At the login screen, type
fields and click Login.(There are two accounts, including username "ad-
min"/password "admin" or username "user"/password "user". "admin" has
full rights and "user" has limited rights.)
Figure 3-5 Login Page
4

Troubleshooting

�
All indicators are Off when the ZXHN H268A equipment is powered On.
First make sure that you have inserted the power adapter of the ZXHN H268A
into a working power socket and that the ZXHN H268A has been powered
On (the switch button is pressed down). If the indicators are still Off after
confirmation of the above items, may be the hardware is damaged. You may
contact local operator for maintenance. Never dismantle the equipment by
yourself.
�
Sometimes, the DSL users cannot access to the Internet normally
First check whether the ZXHN H268A is in the normal state (Check the in-
dicators according to this user manual). If yes, the computer or application
network may be faulty. This is unrelated with DSL. If the ZXHN H268A is ab-
normal, check the status of indicators one by one to remove the fault.
It is suggested to check the following items before seeking help from operator:
i. The DSL telephone cable connectors are proper.
ii. The DSL is away from the power cable and large-power electronic devices.
iii. No telephone extensions and fax machines are connected between the
DSL incoming line and splitter.
iv. The splitter has been installed correctly.
v. The ZXHN H268A has good heat dissipation ratio.
http://192.168.20.1
into both the Username and the Password
admin
in the address bar.