BenQ PL552 User Manual page 42

38 Change your settings
Local KB lock
RC lock
Pixel shift
Smart power
Wake on lan
Switch on state
LED
Switch on delay
Choose to enable or disable the keyboard (control buttons)
function of the display.
• Unlock: Enable the keyboard function.
• Lock all: Lock all keyboard function.
• Lock but volume: Disable all the keyboard function except
the and button.
• Lock but power: Disable all the keyboard function except the
button.
• Lock all expect volume and power: Disable all the
keyboard function except the
Choose to enable or disable the button function of the remote
control.
• Unlock: Enable the keyboard function.
• Lock all: Lock all keyboard function.
• Lock but volume: Disable all the keyboard function except
the and button.
• Lock but power: Disable all the keyboard function except the
POWER button.
• Lock all expect volume and power: Disable all the
keyboard function except the
To disable the lock function from Local KB lock or -RC lock item,
and 1998 on the remote control.
press buttons
For video input sources, you may choose On to move the screen
image automatically to protect the display from "burn-in" or
"after-image" symptoms 30 seconds after not operating the
display.
Choose a backlight level to optimize dynamic power consumption
and picture contrast.
The options are: Off, Standard, Best Power, Best Picture.
Choose On and you can turn on the display by network.
Choose the display status used for the next time you connect the
power cord.
• On - The display will turn on when the power cord is connected
to a wall outlet.
• Standby - The display will remain Standby when the power
cord is connected to a wall outlet.
• Last status - The display will return to the previous power
status (on/off/standby) when removing and replacing the power
cord.
Choose Off to turn off the indicator.
Adjust the power-on delaying time (in seconds) allows a
sequential powering-on for each display by their ID number when
multiple displays are connected.
, and button:
POWER button:
and