8
Parts and Functions
Parts and Functions
Control Panel
PL490
MUTE INPUT
1
2
3
4
No.
Name
1
button
MUTE button
2
INPUT button
3
button
4
button
5
button
6
button
7
MENU button
8
Remote control
sensor and power
9
status indicator
MENU
5
6
7
8
Use this button to turn the display on or put the display to
standby.
Switch the audio mute ON/OFF.
Choose the input source.
• Used as OK button in the On-Screen-Display menu.
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
Move the highlight bar up to adjust the selected item while OSD
menu is on.
Move the highlight bar down to adjust the selected item while
OSD menu is on.
Return to previous menu while OSD menu is on, or to activate
the OSD menu when OSD menu is off.
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When SCHEDULE is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
PL552
9
Description
MUTE INPUT
9
1
2
3
4
5
MENU
6
7
8