Ir Connection - BenQ PL552 User Manual

20 Connecting External Equipment
PC
VGA
• Analog Daisy chain to 9 units without splitter.
• DVI-I to VGA cable is not supplied.
IR daisy-chain Connection
Connect IR Sensor Cable to DISPLAY 1,and connect the IR OUT connector of DISPLAY 1
to the IR IN connector of DISPLAY 2.
IR Sensor Cable

IR connection

This display's remote control sensor will stop working if the IR IN is connected.
DISPLAY 1
VGA IN DVI/VGA OUT
IR IN
DISPLAY 1
IR OUT
External IR
Receiver
VGA IN
IR IN
IR IN
DISPLAY 2
DISPLAY 2