Mounting On A Wall - BenQ PL552 User Manual

6 Unpacking and Installation
• The product should be installed on a flat surface to avoid tipping. The distance between
the back of the product and the wall should be maintained for proper ventilation. Avoid
installing the product in the kitchen, bathroom or any other places with high humidity so
as not to shorten the service life of the electronic components.
• The product can normally operate only under 5000m in altitude. In installations at
altitudes above 3000m, some abnormalities may be experienced.

Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit
(commercially available). We recommend using a mounting interface that complies with
TUV-GS and/or UL1678 standard in North America.
PL490
VESA Grid
Table
1. Lay a protective sheet on a table, which was wrapped around the display when it was
packaged, beneath the screen surface so as not to scratch the screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount,
table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow
correct mounting procedures could result in damage to the equipment or injury to
the user or installer. Product warranty does not cover damage caused by improper
installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer
than the thickness of the mounting bracket) and tighten them securely.
5. Unit without base weight= 21.6 kg. The equipment and its associated mounting means
still remain secure during the test. For use only with UL Listed Wall Mount Bracket
with minimum weight/load: 64.8 kg.
VESA Grid
PL490/PL552
To prevent the display from falling:
• For wall or ceiling installation, we recommend installing the display with metal brackets which are
commercially available. For detailed installation instructions, refer to the guide received with the
respective bracket.
• To lessen the probability of injury and damage resulting from fall of the display in case of
earthquake or other natural disaster, be sure to consult the bracket manufacturer for installation
location.
Protective Sheet
VESA Grid
Tabletop stand
400(H) x 400(V) mm
PL552
Table
Protective Sheet
Tabletop stand