2
Press SETTINGS, to go to the Settings
menu.
3
Select [Check for software upgrades] and
confirm.
The NP2500 checks for a new
»
software version.
4
Read the information shown in the display
of the NP2500.
New software is available for the NP2500:
1
Follow the instructions shown in the
display to complete the update.
»
The NP2500 prompts you to accept
the conditions and download of the
software.
»
The NP2500 restarts after the update.
Note
•
Mandatory updates do not require your acceptance or
confirmation.
The NP2500 already has the latest software
installed:
Press BACK
•
screen.
Press HOME to go to the Home
•
menu.
Information
This is how you can find information about the
NP2500:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Information].
3
Press OK to confirm.
The device information is shown on
»
the display of the NP2500.
Press BACK
»
previous screen.
Press HOME to go to the Home
»
menu.
EN
32
to go back to the previous
to go back to the
Demo mode
You can access the demo mode in the Settings
menu:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Demo mode].
The demo plays continuously until you
»
exit the demo play.
3
To exit the demo play, press
Tip
•
You can start the demo play more quickly with the
DEMO button on the remote control.
Call center numbers
This is how you can find the call center
numbers:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Call centre numbers].
3
Press OK to confirm.
The call center numbers are shown on
»
the display of the NP2500.
Press BACK
»
previous screen.
Press HOME to go to the Home
»
menu.
Restore factory settings
Caution
•
The following procedure erases all custom settings and
resets the NP2500 to the original status as set by the
factory.
This is how to restore the factory settings of
the NP2500:
.
to go back to the