Connect; Connect Sound System; Connect Ac Power - Philips NP2500/37 User Manual

4 Connect

Connect sound system

1
Use the supplied red and white audio
cables to connect the AUX IN jacks of the
sound system with the red and white LINE
OUT jacks of the NP2500 (see 'Rear view'
on page 8).
2
Set the source of the sound system to
'AUX'.
3
Control the sound system as you normally
would.

Connect AC power

Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the NP2500.
1
Connect the NP2500 to the power supply
EN
12
2
Continue with the steps in chapter First-
time setup.
Note
•
The type plate information is located at the back or at
the underside of the NP2500.