Access Control; Recording - Datavideo DVS-200 Configuration Manual

Access Control

Here you can restrict what IP addresses can publish or playback using RTMP. In whitelist mode, only
the listed IPs can publish or playback, in blacklist mode all but the listed IPs can publish or playback.
You must enter the IP address followed by its abbreviated subnet mask, for example 255.255.255.0
is a 24-bit mask so is represented as /24. Please consult your IT department if unsure about these
settings.

Recording

Here we can enable recording, you have three options:
Always – Audio & Video
The software will record as soon as an input stream is detected and will stop recording when the
stream is stopped. Audio and video are recorded together.
Always – Audio Only
The software will record as soon as an input stream is detected and will stop recording when the
stream is stopped. Only audio is recorded.
Manually start/stop – Audio & Video
Recording will not happen automatically, the user must start and stop recording manually. When
enabled button to start and stop recording will be displayed next to the channel name. Audio and
video are recorded together.
Recorded files Suffix
By default, the recorded file is name after the channel name, this option allows you to add additional
text into the file name.
Give each recording a unique time stamp
When checked a unique time stamp will be inserted into the file name of each recording. When this
option is not checked the recorded file name will always be the same, this means subsequent
recording will overwrite the previous file.