Table of Contents
Advertisement
Please Note: Active directory users and groups are cached local and updated periodically,
changes to AD user or Groups may take 15 minutes to take effect.
RTMP Settings
RTMP Port
The default port of 1935 should generally not be changed, for advanced users only.
Always start on key frame
When enabled clients that connect to the RTMP stream will always start playback on a key frame,
this may increase delay.
Disable audio until first video frame is sent
When enabled no audio will be sent until after the first video frame (RTMP clients only).
AV Sync Interval
If the RTMP client's bandwidth is not enough to receive data at the publisher's (encoders) rate, some
frames are dropped by server leading to a synchronization problem. When the timestamp difference
exceeds the value specified as sync argument an absolute frame is sent fixing that.
Max message size
This setting relates to how much memory the RTMP server can use, the default 10MB should be fine
for most cases but if you have issues with very high bitrate streams disconnecting this should be
increased.
Idle Streams
If disabled, the server prevents subscribers from connecting to idle/non-existent live streams and
disconnects all subscribers when stream publisher disconnects. Default is on.
HLS Settings
HLS fragment length
HLS works by creating multiple .TS video files (chunks) from the incoming RTMP stream, the player
then downloads these chunks in order. This setting defines how log each chunk is, larger chunk sizes
will increase delay.
Advertisement
Table of Contents
