Operation; Front Panel Features - Extron electronics SW2 USB User Manual

Operation

This section provides a description of the SW USB front panel features and describes the
procedures for performing the functions that are accessed from the front panel. The
following topics are covered:
•
•
•

Front Panel Features

SW2 USB Front Panel
SW4 USB and SW 4 USB Plus Front Panel
Figure 9.
a
b
c
Front Panel Features
Operations
Updating Firmware
1 2 3
EXEC
MODE
1 2
1 2
3
EXEC
MODE
1 2
SW USB Series Front Panels
Power LED — This green LED lights when the SW USB has power.
Exec Mode LED — This red LED lights when the SW USB is in front panel lock mode,
indicating that input selections cannot be made from the front panel (see
Unlocking the Front Panel (Executive
Input Selection buttons and LEDs — Press these buttons to select inputs 1 and 2
(SW2) or 1 through 4 (SW4 and SW4 Plus). The green LED at the right of each button
lights when the corresponding input has been selected. These buttons also can be used
to initiate front panel lock mode and to reset the unit (see
the Front Panel (Executive
4
ACTIVE USB
1 2
INPUT
1 2 3
OUTPUT
5
4
ACTIVE USB
1
2 3 4
INPUT
3 4
1 2
3 4
OUTPUT
5
Mode)" on page 16).
Mode)" on page 16 and "Resetting" on page 17).
SW USB Series • Operation
4
SW2 USB
USB SWITCHER
SW4 USB
USB SWITCHER
"Locking and
"Locking and Unlocking
12