Extron electronics SW2 USB User Manual page 28

12. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
The Transfer Time section shows the amounts of remaining and elapsed time for the
•
update.
The Total Progress section displays a progress bar with
•
In the Devices section, the Progress column displays an incrementing percentage
•
and another progress bar. The Status column displays
Figure 15. Firmware Upload in Progress
When the upload is complete, the
column shows , and
100%
Status field.
Figure 16. Firmware Upload Complete
13. When the firmware upload and unit reset are complete, close the Firmware Loader
window.
field shows
Remaining Time
is displayed above the progress bar and in the
Completed
above it.
Uploading...
Uploading .
, the Progress
00.00.00
SW USB Series • Operation 22