Table of Contents
Advertisement
Quick Links
TruVision NVR 22 (S/P) Quick Start
Guide
Figure 1: Back panel connections (TVN 22S shown)
1. Connect one audio input to RCA connectors.
2. Connect to an HDTV. The HDMI connection
supports both digital audio and video.
3. Connect one CCTV monitor (BNC-type
connectors).
4. Connect to a RS-232 device.
5. RS-485 port not used.
6. Connect to a keypad (KTD-405 shown).
7. Connect up to four alarm relay outputs.
8. Connect to a network (RJ45).
9. Connect to speakers for audio output.
Default IP address: 192.168.1.82
P/N 1073193-EN • REV E • ISS 27JUL17
© 2017 United Technologies Corporation. Interlogix is part of UTC Climate, Controls & Security, a unit of United
Technologies Corporation. All rights reserved.
10. Connect to a VGA monitor.
11. Universal Serial Bus (USB). Connect to an
additional device such as a USB mouse,
CD/DVD burner, or USB HDD.
12. Connect to an optional eSATA device such as
HDD, CD/DVD-RM.
13. Connect up to 16 alarm inputs (depending on
model).
14. Connect to ground.
15. Connect to a power cord.
16. 8/16 PoE ports (depending on model). (TVN 22S
only)
Advertisement
Table of Contents
Related Manuals for Interlogix TruVision NVR 22
Summary of Contents for Interlogix TruVision NVR 22
- Page 1 16. 8/16 PoE ports (depending on model). (TVN 22S only) Default IP address: 192.168.1.82 P/N 1073193-EN • REV E • ISS 27JUL17 © 2017 United Technologies Corporation. Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved.
- Page 2 Receiver for IR remote. To connect the remote control to the recorder, press the Device button, enter the device address, and press Enter. See “IR remote control” on page 5 for more information. TruVision NVR 22 (S/P) Quick Start Guide...
- Page 3 Press once to enter quick archive mode. Press twice to start archiving. Indicator blinks green when data is being written to backup device. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a USB mouse, CD/DVD burner, and USB Hard Disk Drive (HDD). TruVision NVR 22 (S/P) Quick Start Guide...
-
Page 4: Package Contents
12. Close: Close the toolbar. Quick install Package contents Recommended steps for setting up the The TruVision NVR 22(S/P) (model TVN 22 recorder: (S/P) is shipped with the following items: 1. Connect all the devices required to the •... -
Page 5: Operating The Recorder
2. Select Display Mode Settings > Monitor. properly: Server port and RTSP port. 3. Check the recorder’s device address value. The default value is 255. The device address is valid for all IR controls. TruVision NVR 22 (S/P) Quick Start Guide... -
Page 6: Live View Mode
• Right-click the mouse and select Menu from the pop-up menu. Configures user settings. The main menu screen appears. Move the mouse over a command icon in the menu toolbar and click to select it. View system information. TruVision NVR 22 (S/P) Quick Start Guide... -
Page 7: Specifications
442 x 442 x 92 mm (17.4 x 17.4 x 3.6 in.) Weight (without HDD): ≤ 5 kg TVN 22 / TVN 22S ≤10Kg TVN 22P Contact information For contact information, go to www.interlogix.com, or www.utcfssecurityproducts TruVision NVR 22 (S/P) Quick Start Guide...