Top Vent Adapter Installation; Rear Vent & Rear Vent To Top Vent Adapter Installation - Quadra-Fire CB1200M-MBK Installation Manual

B. Top Vent Adapter Installation
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
Installing the Top Vent Adapter
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet.
2. Slide the top vent adapter onto the rear exhaust outlet
and adjust the assembly to a vertical position.
3. Drill 4 holes with #26 drill bit (provided) into the back of
the appliance using the outer shield as a pattern (make
sure the assembly is vertical). Figure 21.1
4. Install the 4 mounting screws.
5. Install the vent pipe into the top vent adapter (be sure to
silicone all joints).
6 To clean the top vent adapter, open the clean-out cover.
See Figure 21.1
3" - 6"
Offset
Adapter
3" - 3"
Top Vent
Adapter
Figure 21.1
November 30, 2017
Drill holes in back of
stove and secure with 4
screws, 2 on each side.
Clean Out
Cover
7014-258B
C. Rear Vent & Rear Vent to Top Vent Adapter
Installation
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet.
2. Slide the adapter onto the rear exhaust outlet and adjust
the assembly to the appropriate position.
3. Install the vent pipe into the adapter (be sure to silicone
all joints).
Figure 21.2 - Rear Vent Adapter
Top Vent
Adapter
(TPVNT-6)
Clean-Out
Cover
Figure 21.3 - Rear to Top Vent Adapter - 90
CB1200 FREESTANDING
Rear Vent
Adapter
(811-0620)
Clean-Out Cover
o
21