Venting Systems; Full Reline With Outside Air - Horizontal; Illustrations Reflect Typical Installations And Are For Design Purposes Only; Actual Installation May Vary Due To Individual Design Preference - Quadra-Fire CB1200MI-MBK Installation Manual
Hide thumbs
Also See for CB1200MI-MBK:
- Owner's manual and installation instructions (56 pages) ,
- Owner's manual (52 pages) ,
- Owner's manual installation and operation (52 pages)
Table of Contents
Advertisement
5
Venting Systems
A. Full Reline With Outside Air - Horizontal
CAUTION
Never draw outside combustion air from:
•
Wall, floor or ceiling cavity
•
Enclosed space such as an attic or garage
Figure 17.1
NOTE:
In Canada, where passage through a wall or partition of
combustible construction is desired, the installation shall
conform to CAN/CSA-B365.
October 9, 2017
NOTE; Use metal plate around
exhaust vent pipe and seal all
edges with non-flammable insu-
lation such as mineral wool or
ceramic.
Do not use high temperature
caulking materials to seal any
edge to prevent furture service-
ability.
7014-285A
WARNING
Fire Risk.
Inspection of Chimney:
• Masonry chimney must be in good condition.
• Meets minimum standard of NFPA 211
• Factory-built chimney must be a minimum 6 inch
(152mm) UL103 HT.
Outside Air through Rear
Wall (Horizontal)
NOTE:
•
Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
•
Illustrations/diagrams are not drawn to scale.
•
Actual installation may vary due to individual design
preference.
CB1200 Pellet Insert
17
Advertisement
Table of Contents
