Quadra-Fire CB1200MI-MBK Installation Manual page 20

CB1200 Pellet Insert
4. Install the left shroud panel corner; 2 screws into
back of hopper and 1 screw down into the filler piece
(Figure 20.1).
1 screw down
into filler piece
Figure 20.1
5. Install the Rear Panel using six screws (Figure 20.2).
6 screws to attach
rear panel
Figure 20.2
6. Install the cover plate over the top vent opening
using 4 screws (Figure 20.3).
Figure 20.3
7. Attach the left shroud panel using eight screws
(Figure 20.4).
8 screws to attach
left shroud panel
Figure 20.4
20
2 screws into
back of hopper
8. Assemble the right shroud panel corner and the right
shroud panel using 3 screws (Figure 20.5).
Figure 20.5
9. Attach the right panel assembly using 4 screws to
appliance (Figure 20.6).
5 screws to attach
right shroud panel
Figure 20.6
10. Using the electric drill with #26 drill; bit drill 3 holes
into the hopper. Add three screws to secure shroud
assembly to the appliance (Figure 20.7).
Figure 20.7
11. Using the electric drill with #26 drill; bit drill 2 holes
into the back of the hopper. Add two screws to secure
shroud assembly to the appliance (Figure 20.8).
Figure 20.8
7014-285A
3 screws to attach right shroud
panel to right shroud corner piece
Drill these 3
holes
Drill these 2
holes
October 9, 2017