Table of Contents
Advertisement
If you have the Internet access information provided by
your ISP, you can configure the gateway by using the
Gateway Setup Wizard. When you are finished with the
Wizard, the gateway will be configured for basic use with
your modem and your home network.
Setting Up Your Home Wireless Gateway
1 On the Setup page, click "Set Time Zone" to select the
appropriate time zone for your location. Click "Enter"
to move to the "Change Password" screen.
2 If you wish to use have a password assigned to your
Home Wireless Gateway, enter it here.
NOTE: The unit is shipped without a password, so the
default password field will be blank.
3 Click "Enter" to complete the Password entry. The
"Cable/DSL Setup" screen displays.
4 Click "Enter" to proceed to the "Cable/DSL Settings |
Standard" screen.
If your ISP has not supplied you with a Static IP address or a
DNS address, click "Enter" and proceed to Step 11.
Otherwise, proceed to step 5.
5 If your ISP has provided you with an IP address
and\or a DNS address, click "Yes" and enter the
information in the appropriate location. Click "Enter"
to complete the Standard Cable/DSL setup. The
"Cable/DSL Settings | Advanced" screen appears.
6 If your ISP has provided you with a user name and
password for PPPoE authentication, select "Yes" and
enter this information. If you have been supplied
with a Host Name by your ISP, enter this information
also. Click "Enter" to complete the Advanced
Cable/DSL setup.
7 Click "Enter" to go the "Wireless Setup" screen.
8 There are several channels available for use by your
Home Wireless Gateway. It is recommended that you
let the Home Wireless Gateway automatically select
the channel to use. However, if you wish to manually
Setup Program
19
Advertisement
Table of Contents
