Cp 443-1 For Industrial Ethernet / Manual Part B - Siemens SIMATIC S7-CPs Manual

Notes on the Product
Notes on the Product
Product names
This description contains information on the following product
S CP 443−1
Order number 6GK7 443−1EX20−0XE0
Hardware product version 4 and firmware version V2.1
for SIMATIC S7−400 / C7−400
Note
In the remainder of this document, the term "CP" will be used instead of the full
name of the product.
Compatibility with previous versions
Notice
Make sure that you read the information regarding extended functions and
restrictions in Chapter 7 of this manual!
Address label: Unique MAC address preset for the CP
The CP ships with a factory-set MAC address.
The MAC address is printed on the housing.
If you configure a MAC address (ISO transport connections), we recommend that
you use the MAC address printed on the module for module configuration!
S This ensures that you assign a unique MAC address in the subnet!
S If you replace a module, the MAC address of the predecessor is adopted when
you load the configuration data; configured ISO transport connections remain
operable.
-
B−2

CP 443-1 for Industrial Ethernet / Manual Part B

C79000-G8976-C223−06
Release 07/2010