Assembly Step - Horizon Fitness Elite T5000 Owner's Manual

ASSEMBLY STEP 1

HARDWARE foR STEP 1 :
Elite
SCREW (1) SCREW (1-1)
T5000
Φ 4 x 12 M4 x 12
Qty: 2 Qty: 4
SCREW (1-1)
SCREW (1)
LEFT CONSOLE MAST
6
A Open hardware for step 1.
B Attach console mast cover to main frame
using 3 screws each side.
RIGHT CONSOLE MAST
ASSEMBLY STEP 2
HARDWARE foR STEP 2 :
BOLT (A) SPRING WASHER (B) ARC WASHER (C)
M8 x 20 mm 8.2 mm Φ8.2 x Φ17
Qty: 6 Qty: 6 Qty: 6
RIGHT CONSOLE MAST
LEAD WIRE
CONSOLE CABLE
LEFT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (C)
MAIN FRAME BRACKET
A Open hardware for step 2.
B Pull lead wire through right console mast.
After pulling the lead wire through the mast, the
top of the console cable should be located at
the top of the mast. Detach and discard lead wire.
NOTE: Do not pinch console cable when placing
N
the mast onto the main frame bracket.
C Attach console mast to main frame
bracket using 3 bolts (a), 3 spring
washers (b) and 3 arc washers (c).
NOTE: Do not tighten bolts until step 3 is complete.
D Repeat step C on other side.
Elite
T5000
7