Then, Connect To The Internet - NETGEAR MBR814X Reference Manual

Reference Manual for the Mobile Broadband Router MBR814X
Enter admin for the user name and password for the password, both in lower case letters.
After logging in you will see the Basic Setup menu.
Figure 3-4

Then, connect to the Internet.

1. Check the Router Status page to make sure that wireless broadband coverage is available.
2. Verify connectivity to the Internet by opening a browser or verify access to network resources
such as files and printers.
3. Make any needed configuration changes to fit your wireless local area network (WLAN) such
as setting up wireless security.
The router is now properly attached to your network. You are now ready to configure your
router to connect to the Internet. There are two ways you can configure your router to connect
to the Internet:
Unless your ISP automatically assigns your configuration automatically via DHCP, you need the
configuration parameters from your ISP you recorded in
Information" on page
3-6
3-3.
v1.0, January 2006
"Record Your Internet Connection