NETGEAR MBR814X Reference Manual page 63

Table 6-1. Router Status Fields
Field
Firmware Version
Broadband
Modem SW Version
IMEI
IMSI
Operator
Frequency
Cell ID
Self Test
WAN Port
Connection Status
IP Address
DHCP
IP Subnet Mask
Gateway IP Address The gateway IP address used by the Internet port.
Domain Name
Server (DNS)
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
Reference Manual for the Mobile Broadband Router MBR814X
Description
This field displays the router firmware version.
These parameters apply to a wireless broadband PC card.
Software version used in the broadband PC card.
International Mobile Equipment Identity number assigned to the
Broadband PC card.
International Mobile Subscriber Identity number assigned to the SIM card in the
Broadband PC card, if installed.
Network ISP information.
The frequency currently in use for the wireless connection.
The identification number of the cell that the wireless module is currently
connected to.
The result of the power-on self test.
These parameters apply to the Internet port of the router.
The connection status of the Internet port.
The IP address. If no address is shown, the router cannot connect to the
Internet.
If None, the router uses a fixed IP address on the broadband.
If Client, the router gets an IP address dynamically from the ISP.
The IP Subnet Mask .
The DNS Server IP addresses. These addresses are usually obtained
dynamically from the ISP.
These parameters apply to the Local (LAN) port of the router.
The Ethernet MAC address.
The defualt IP address is 192.168.0.1.
If OFF, the router will not assign IP addresses to PCs on the LAN.
If ON, the router will assign IP addresses to PCs on the LAN.
The default IP Subnet Mask is 255.255.255.0.
These parameters apply to the router's wireless connection.
Name of the wireless local area network (WLAN).
The country in which the wireless port is configured to operate.
Current channel in use.
Indicates if the wireless access point feature is enabled.
Indcates if the MBR814X us broadcasting its SSID.
v1.0, January 2006
6-5